Scheduling Policies =================== This document describes the policies used to select the preference of tasks and to select the preference of workers used by Dask's distributed scheduler. For more information on how this these policies are enacted efficiently see :doc:`Scheduling State`. .. _decide-worker: Choosing Workers ---------------- When a task transitions from waiting to a processing state, we decide a suitable worker for that task. If the task has significant data dependencies or if the workers are under heavy load, then this choice of worker can strongly impact global performance. Similarly, the placement of root tasks affects performance of downstream computations, since it can determine how much data will need to be transferred between workers in the future. Different heuristics are used for these different scenarios: Initial Task Placement - queuing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When :ref:`queuing ` is enabled (the default), each initial task is simply scheduled on the least-busy worker at the moment. If an initial task wants to run, but all worker threads are occupied, then the task instead goes onto (or stays on) the queue and is not sent to any worker. .. _co-assignment: Initial Task Placement - no queuing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Currently, this scheduling is only used when :ref:`queuing ` is disabled (the ``distributed.scheduler.worker-saturation`` config value is set to ``inf``). We want neighboring root tasks to run on the same worker, since there's a good chance those neighbors will be combined in a downstream operation:: i j / \ / \ e f g h | | | | a b c d \ \ / / X In the above case, we want ``a`` and ``b`` to run on the same worker, and ``c`` and ``d`` to run on the same worker, reducing future data transfer. We can also ignore the location of ``X``, because assuming we split the ``a b c d`` group across all workers to maximize parallelism, then ``X`` will eventually get transferred everywhere. (Note that wanting to co-locate ``a b`` and ``c d`` would still apply even if ``X`` didn't exist.) Calculating these cousin tasks directly by traversing the graph would be expensive. Instead, we use the task's TaskGroup, which is the collection of all tasks with the same key prefix. (``(random-a1b2c3, 0)``, ``(random-a1b2c3, 1)``, ``(random-a1b2c3, 2)`` would all belong to the TaskGroup ``random-a1b2c3``.) To identify the root(ish) tasks, we use this heuristic: 1. The TaskGroup has 2x more tasks than there are threads in the cluster 2. The TaskGroup has fewer than 5 unique dependencies across *all* tasks in the group. We don't just say "The task has no dependencies", because real-world cases like :obj:`dask.array.from_zarr` and :obj:`dask.array.from_array` produce graphs like the one above, where the data-creation tasks (``a b c d``) all share one dependency (``X``)---the Zarr dataset, for example. Though ``a b c d`` are not technically root tasks, we want to treat them as such, hence allowing a small number of trivial dependencies shard by all tasks. Then, we use the same priority described in :ref:`priority-break-ties` to determine which tasks are related. This depth-first-with-child-weights metric can usually be used to properly segment the leaves of a graph into decently well-separated sub-graphs with relatively low inter-sub-graph connectedness. Iterating through tasks in this priority order, we assign a batch of subsequent tasks to a worker, then select a new worker (the least-busy one) and repeat. Though this does not provide perfect initial task assignment (a handful of sibling tasks may be split across workers), it does well in most cases, while adding minimal scheduling overhead. Initial task placement is a forward-looking decision. By colocating related root tasks, we ensure that their downstream tasks are set up for success. Downstream Task Placement ~~~~~~~~~~~~~~~~~~~~~~~~~ When initial tasks are well-placed, placing subsequent tasks is backwards-looking: where can the task run the soonest, considering both data transfer and worker busyness? Tasks that don't meet the root-ish criteria described above are selected as follows: First, we identify the pool of viable workers: 1. If the task has no dependencies and no restrictions, then we find the least-occupied worker. 2. Otherwise, if a task has user-provided restrictions (for example it must run on a machine with a GPU) then we restrict the available pool of workers to just that set. Otherwise, we consider all workers. 3. We restrict the above set to just workers that hold at least one dependency of the task. From among this pool of workers, we then determine the worker where we think the task will start running the soonest, using :meth:`Scheduler.worker_objective`. For each worker: 1. We consider the estimated runtime of other tasks already queued on that worker. Then, we add how long it will take to transfer any dependencies to that worker that it doesn't already have, based on their size, in bytes, and the measured network bandwidth between workers. Note that this does *not* consider (de)serialization time, time to retrieve the data from disk if it was spilled, or potential differences between size in memory and serialized size. In practice, the queue-wait-time (known as *occupancy*) usually dominates, so data will usually be transferred to a different worker if it means the task can start any sooner. 2. It's possible for ties to occur with the "start soonest" metric, though uncommon when all workers are busy. We break ties by choosing the worker that has the fewest number of bytes of Dask data stored (including spilled data). Note that this is the same as :ref:`managed ` plus :ref:`spilled ` memory, not the :ref:`process ` memory. This process is easy to change (and indeed this document may be outdated). We encourage readers to inspect the ``decide_worker`` and ``worker_objective`` functions in ``scheduler.py``. .. currentmodule:: distributed.scheduler .. autosummary:: decide_worker .. autosummary:: Scheduler.decide_worker_non_rootish .. autosummary:: Scheduler.decide_worker_rootish_queuing_disabled .. autosummary:: Scheduler.decide_worker_rootish_queuing_enabled .. autosummary:: Scheduler.worker_objective Choosing Tasks -------------- We often have a choice between running many valid tasks. There are a few competing interests that might motivate our choice: 1. Run tasks on a first-come-first-served basis for fairness between multiple clients 2. Run tasks that are part of the critical path in an effort to reduce total running time and minimize straggler workloads 3. Run tasks that allow us to release many dependencies in an effort to keep the memory footprint small 4. Run tasks that are related so that large chunks of work can be completely eliminated before running new chunks of work 5. Run tasks that use existing work before starting tasks that create new work Accomplishing all of these objectives simultaneously is impossible. Optimizing for any of these objectives perfectly can result in costly overhead. The heuristics with the scheduler do a decent but imperfect job of optimizing for all of these (they all come up in important workloads) quickly. Last in, first out ~~~~~~~~~~~~~~~~~~ When a worker finishes a task, the immediate dependencies of that task get top priority. This encourages a behavior of finishing ongoing work immediately before starting new work (depth-first graph traversal). This often conflicts with the first-come-first-served objective, but often results in significantly reduced memory footprints and, due to avoiding data spillage to disk, better overall runtimes. .. _priority-break-ties: Break ties with children and depth ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Often a task has multiple dependencies and we need to break ties between them with some other objective. Breaking these ties has a surprisingly strong impact on performance and memory footprint. When a client submits a graph we perform a few linear scans over the graph to determine something like the number of descendants of each node (not quite, because it's a DAG rather than a tree, but this is a close proxy). This number can be used to break ties and helps us to prioritize nodes with longer critical paths and nodes with many children. The actual algorithms used are somewhat more complex and are described in detail in `dask/order.py`_ .. _`dask/order.py`: https://github.com/dask/dask/blob/main/dask/order.py First-Come-First-Served, Coarsely ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The last-in-first-out behavior used by the workers to minimize memory footprint can distort the task order provided by the clients. Tasks submitted recently may run sooner than tasks submitted long ago because they happen to be more convenient given the current data in memory. This behavior can be *unfair* but improves global runtimes and system efficiency, sometimes quite significantly. However, workers inevitably run out of tasks that were related to tasks they were just working on and the last-in-first-out policy eventually exhausts itself. In these cases workers often pull tasks from the common task pool. The tasks in this pool *are* ordered in a first-come-first-served basis and so workers do behave in a scheduling manner that's fair to multiple submissions at a *coarse* level, if not a fine-grained one. Dask's scheduling policies are short-term-efficient and long-term-fair to multiple clients. .. _queuing: Avoid over-saturating workers ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ When there are many initial tasks to run, workers don't need to know about all of them up front:: o o o o o o o o o o / \ / \ / \ / \ / \ / \ / \ / \ / \ / \ o o o o o o o o o o o o o o o o o o o o | | | | | | | | | | | | | | | | | | | | * * * * * * * * * * * * * * * * * * * * <-- initial tasks The scheduler only submits initial tasks (``*`` tasks in the figure above) to workers until all worker threads are filled up [#]_. The remaining initial tasks are put in a queue on the scheduler, ordered by priority. Tasks are popped off this queue and scheduled whenever a thread opens up on a worker *and* there are no other higher-priority tasks (``o`` tasks in this diagram) that could run instead. This ensures we finish existing streams of work before starting on new work. This keeps memory use as low as possible and generally gives much more stable execution compared to submitting all initial tasks at once. There are two downsides to this queueing: 1. Initial tasks are not :ref:`co-assigned `. This means that workers may have to make data transfers which could have been avoided. This can cause a moderate slow-down on some workloads compared to disabling queuing. However, in many of those cases, disabling queuing might cause workers to run out of memory, so the slow-down is usually a better tradeoff. 2. For embarrassingly-parallel workloads like a ``client.map``, there can be a minor increase in overhead per task, because each time a task finishes, a scheduler<->worker roundtrip message is required before the next task starts. In most cases, this overhead is not even measurable and not something to worry about. This will only matter if you have very fast tasks, or a very slow network—that is, if your task runtime is the same order of magnitude as your network latency. For example, if each task only takes 1ms, and a scheduler<->worker roundtrip message takes 10ms, all those roundtrip messages will dominate the runtime. This means you should make your tasks bigger (via larger chunksizes, or batching more work into single Dask tasks). In general, task runtime should be significantly larger than network latency for Dask to perform well. .. [#] By default, it will actually submit slightly more tasks than threads per worker (for example, 1 extra task for workers with <= 10 threads). This slight buffering maintains better performance when tasks are very fast. See next section for details. .. _adjust-queuing: Adjusting or disabling queuing ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *It's rare to need to adjust queuing. The default value works well for almost all cases. *Only advanced users wanting to tune performance in unusual cases might consider *adjusting this parameter.* Queuing behavior is controlled by the ``distributed.scheduler.worker-saturation`` config value. This is set via the :doc:`Dask configuration system `. The config value must be set on the scheduler, before the scheduler starts. The value controls how many initial chunks of data workers will have in memory at once. This is basically the "breadth" of execution through the graph. Specifically, up to ``ceil(worker-saturation * nthreads)`` initial tasks are sent to a worker at a time. By default, ``worker-saturation`` is ``1.1``. This value was chosen to keep worker memory relatively low (workers with <= 10 threads will only get 1 extra initial chunk in memory each), while mitigating the effects of the extra latency for users running on very slow networks. * If workers are running out of memory, consider setting ``worker-saturation`` to ``1.0`` instead of ``1.1``. * If your network is very slow, or your tasks are extremely fast, and you want to decrease runtime, consider increasing ``worker-saturation``. This *may* speed things up slightly, at the cost of increased memory use. Values above ``2.0`` usually have little benefit. * If your graph would benefit from :ref:`co-assignment `, and you have plenty of memory on the cluster, consider disabling queueing by setting ``worker-saturation`` to ``inf`` to speed up runtime. Where these decisions are made ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The objectives above are mostly followed by small decisions made by the client, scheduler, and workers at various points in the computation. 1. As we submit a graph from the client to the scheduler we assign a numeric priority to each task of that graph. This priority focuses on computing deeply before broadly, preferring critical paths, preferring nodes with many dependencies, etc.. This is the same logic used by the single-machine scheduler and lives in `dask/order.py `_. 2. When the graph reaches the scheduler the scheduler changes each of these numeric priorities into a tuple of two numbers, the first of which is an increasing counter, the second of which is the client-generated priority described above. This per-graph counter encourages a first-in-first-out policy between computations. All tasks from a previous call to compute have a higher priority than all tasks from a subsequent call to compute (or submit, persist, map, or any operation that generates futures). 3. Whenever a task is ready to run (its dependencies, if any, are complete), the scheduler assigns it to a worker. When multiple tasks are ready at once, they are submitted to workers, in priority order. If scheduler-side queuing is active, they are submitted until all workers are full, then any leftover runnable tasks are put in the scheduler queue. If queuing is disabled, then all runnable tasks are submitted at once. 4. However, when the worker receives these tasks, it considers their priorities when determining which tasks to prioritize for fetching data or for computation. The worker maintains a heap of all ready-to-run tasks ordered by this priority. 5. If scheduler-side queuing is active: when any task completes on a worker, if there are no other higher-priority tasks to run, the scheduler pops off the next queued task and runs it on that worker.